Phone: 215-822-6401 | Toll Free: 800-203-3419

Medical & Pharmaceutical Solutions

Medical and pharmaceutical manufacturers operate in environments where contamination control, product quality, and process consistency are critical. From medical device assembly and injection molding to non-woven materials and packaging, even small amounts of static charge or particulate contamination can contribute to rejects, production delays, and inconsistent results.

Electrostatic charge can develop throughout manufacturing as plastic components, films, non-wovens, and other materials are handled, separated, conveyed, or assembled. This charge can attract dust and particles to critical surfaces, interfere with material handling, and create challenges even within controlled environments such as laminar flow hoods. Effective static control and particulate removal can help reduce contamination, improve process consistency, increase yields, and support more efficient production.

Medical & Pharmaceutical Manufacturing Applications

  • Medical Device Production & Assembly
    • Neutralize static during the assembly of catheters, tubing, plastic components, housings, and other medical devices to reduce particle attraction and help maintain cleaner product surfaces—even within laminar flow hoods and controlled environments.
  • Injection Molded Parts
    • Reduce static on molded plastic medical components to minimize dust and particulate attraction, improve part handling, and maintain cleaner surfaces for downstream assembly and packaging.
  • Medical Packaging
    • Control static and remove contamination from films, pouches, trays, blister materials, and other medical packaging to improve material handling, cleanliness, and packaging consistency.
  • Non-Woven Materials
    • Manage static during the production and converting of non-woven materials used in medical products, helping improve web handling, material positioning, and production efficiency.
  • Fluid Bags
    • Control static on films and other materials used in fluid and IV bag production to reduce particulate attraction and maintain cleaner surfaces throughout converting, assembly, and packaging.

Whether reducing particle attraction during device assembly, improving the handling of non-woven materials, or maintaining cleaner medical packaging surfaces, Simco-Ion provides static control and particulate removal solutions designed to improve quality, consistency, and production efficiency.

IQ Power Nozzle

The IQ Power Nozzle is a shockless pulse DC ionizer engineered to operate at 7 kV. The IQ Power Nozzle is compatible with Simco Ion’s IQ Power Static Neutralizing system. When used with the IQ BPS Power Supply, users of the IQ Power Nozzle have worry free, one-touch setup and continuous active monitoring. The IQ Power Nozzle’s compact size allows for neutralizing surfaces in a variety of applications.

Two configurations are available:

High Efficiency Perforated (HE): Offers exceptional performance with significantly lower air consumption compared to other nozzles. Recommended for use in applications less than 18 inches from the target, where a high volume of air is not required. 

Slotted: Recommended for applications where a more focused ionized air stream is needed.

 

Features and Benefits

  • Flexible installation allows multiple nozzles to be positioned on a single wire run
  • Continuous monitoring of performance and status
  • IP-66 rated against particulate and splash
Input Voltage 7 kVDC (IQ Power BPS speed mode) using specified HV cable
Air Input 80 psi, max
Air Input Connections Supplied 1/8 NPT straight or right angle for use with 1/4" O.D.tubing
Air Consumption Slotted: 10 scfm @ 30 psi
Perforated HE: 1.25 cfm @ 30 psi
Dimensions 2.1"L x 2.1"W x 1.3"H
Temperature 60°C (140°F) max
IP Rating IP-66

The IQ Power Nozzle can be user installed in two different positions on the high voltage wiring. When installing a single nozzle it should be located at the end of the high voltage wiring in the ‘dead end’ position. Additional nozzles can be installed upstream from the dead end nozzle in the ‘in-line’ configuration. Up to four nozzles total can be placed on a single high voltage run.