Phone: 215-822-6401 | Toll Free: 800-203-3419

GO

CLOSE

ApplicationsContamination Control

Contamination Control Solutions

One of the greatest barriers to achieving high quality is contamination. Dust and other organic material are present in the air and on the substrates. If this contamination lands on the material before manufacturing, the material is compromised throughout the entire process. Ultimately, contamination on material can pose a serious threat to the quality and appearance of the end product. However, the application of high performance contact cleaning or non-contact web cleaning can dramatically improve yields, reduce waste, increase run time and increase quality ultimately leading to greater profitability and happier customers. Simco-Ion has solutions to help in a variety of industries

Contamination Control Solutions Include:

To learn more about contamination control solutions, contact us here. 

IQ Power Nozzle

IQ Power Nozzle

Request a
Quote

Find a
Specialist
Contact Us: 800-203-3419

The IQ Power Nozzle is a shockless pulse DC ionizer engineered to operate at 7 kV. The IQ Power Nozzle is compatible with Simco Ion’s IQ Power Static Neutralizing system. When used with the IQ BPS Power Supply, users of the IQ Power Nozzle have worry free, one-touch setup and continuous active monitoring. The IQ Power Nozzle’s compact size allows for neutralizing surfaces in a variety of applications.

Two configurations are available:

High Efficiency Perforated (HE): Offers exceptional performance with significantly lower air consumption compared to other nozzles. Recommended for use in applications less than 18 inches from the target, where a high volume of air is not required. 

Slotted: Recommended for applications where a more focused ionized air stream is needed.

 

Features and Benefits

  • Flexible installation allows multiple nozzles to be positioned on a single wire run
  • Continuous monitoring of performance and status
  • IP-66 rated against particulate and splash
Input Voltage 7 kVDC (IQ Power BPS speed mode) using specified HV cable
Air Input 80 psi, max
Air Input Connections Supplied 1/8 NPT straight or right angle for use with 1/4" O.D.tubing
Air Consumption Slotted: 10 scfm @ 30 psi
Perforated HE: 1.25 cfm @ 30 psi
Dimensions 2.1"L x 2.1"W x 1.3"H
Temperature 60°C (140°F) max
IP Rating IP-66

The IQ Power Nozzle can be user installed in two different positions on the high voltage wiring. When installing a single nozzle it should be located at the end of the high voltage wiring in the ‘dead end’ position. Additional nozzles can be installed upstream from the dead end nozzle in the ‘in-line’ configuration. Up to four nozzles total can be placed on a single high voltage run.