High Temperature Ionizer Model 4610 with Controller

Powered by Model 4052E Controller; connects to the controller via interchangeable HV cable connectors

8 kVDC

-94°F to 302°F (-70°C to 150°C); max 85% relative humidity, non-condensing

<3 sec @ 6"; <5 sec @ 10", <10 sec @ 18" distance between ionizer and CPM (±1000-100V) with 90 fpm hood airflow velocity (tested in accordance with ANSI/ESD STM3.1-2000)

60-100 fpm (18.3-30.5 mpm) recommended

4 tungsten alloy or single-crystal silicon points

Rated at 30 kV, available in 2 lengths, 13.3 and 21.7 ft (4 and 6m)

Body Teflon; Fins/rivet PEEK

2 mounting slots provided; methods varies depending on environment

1.5H x 1.2W x 4.5L in. (3.8H x 3.5W x 11.4L cm)

4 oz (117g)

Two-year limited warranty

110/200/220/240 VAC, 50/60 Hz, 3.6W, 30 mA at 120 VAC, fuse protected

9 kVDC

<20 µA

-20 to 104°F (-29 to 40°C), max 85% relative humidity, non-condensing

On/off power switch

Green POWER; Red ALARM (indicates HV power supply failure)

250 VAC, 250 mA, 5 x 20 slow blow

Stainless steel

2.3H x 3.8D x 8.3L in. (5.7H x 9.5W x 21L cm)

3 lb (1.6 kg)

Two-year limited warranty

High-temp Ionizer with tungsten emitter points

High-temp Ionizer with silicon emitter points with 4m cable

High-temp ionizer with silicon emitter points and 6m cable

Controller

High Voltage Connector Kit