Ceiling Emitter Ionizer Model 5509e

24 VAC, 50/60 Hz, 1.25W

±10 VDC control signal from a 5024(e) or 5084e controller

0-18 kVDC, ±10% for each polarity; positive and negative output levels adjusted centrally at controller and locally at each emitter

<15 mA; current and voltage limited to eliminate shock hazard

Telephone type RJ-11 modular jack receptacle on each end of emitter

Each emitter has controls that independently adjust both positive and negative output

Output and balance stability is achieved by independently regulating the ion emission voltage of each polarity at each emitter

Precise timing (0-10 sec) is supplied by the controller. LEDs on each emitter indicate the polarity of the ion emission

Pulsed DC

Single crystal silicon, machined titanium, or tungsten alloy; all emitter points are replaceable; estimated emitter point life varies from 2-3 years depending on material used

Annually, semi-annually, or quarterly depending on manufacturing sensitivity

<0.005 ppm

Below background level

Visual alarm, red LED located in the middle of the emitter chassis indicates an alarm condition; audible alarm, sounds at the 5024e/5084e controller when an alarm event occurs at any emitter

A variety of surface and flush mounting methods and brackets is available, including cleanroom-compatible interlocking self-adhesive mounts (3M TYPE SJ 3551)

Available in 2.5, 5, 10, 15, 24, 36, or 60 in. lengths (63.5, 127, 254, 381, 609, 914, 1524 mm)

1.25H x1.5D x 17.5L in. (3.2 x 3.8 x 44.5 cm)

1.4 lb (0.5 kg)

Model 5024(e) or 5084(e) Controller