You are here: Technology Products > Ionization Products > Ionization Instrumentation > Periodic Electrostatic Verification System Login  |  Register

Periodic Electrostatic Verification System

Minimize

Periodic Electrostatic/Ionizer Verification System Model 775PVSPeriodic Electrostatic Verification System Model 775PVS

A Low-cost, Handheld Set of Instruments for Measuring Electrostatic Fields and Testing Ionizer Performance

The Simco-Ion Periodic Verification System Model 775PVS is a hand-held alternative to a charged plate monitor. It consists of three components-a fieldmeter, a detachable plate, and a charger-for measuring static charge and verifying ionizer performance. Used alone, the fieldmeter measures electrostatic fields on any surface.
 

  • Digital display
  • Distance ranging lights
  • Chopper circuit
  • NIST-traceable calibration
     

Input

9 VDC alkaline battery included; life in excess of 40 hours

Display

3-1/2 digits, 0.4" (1 cm) digit height

Output

Analog output through miniature jack, 1V corresponds to 10 kV

Response

5 Hz at analog output, digital display updates 3 times per second

Features

HOLD and LOW BATTERY indicators, automatic polarity

Controls

On/off pushbutton, SAMPLE/HOLD pushbutton, ZERO control

Range

±0.00 to 19.99 kV @ 1" (2.5 cm); higher voltages may be measured if distance is >1" (2.5 cm)

Accuracy

±5%, chopper stabilized (accuracy unaffected by air ionization), least significant digit of display indicates tens of volts

Environment

Operates at 10-40°C (50-104°F) and 0-85% RH (non-condensing)

Ground

Ground through conductive case or snap-fastener

Dimensions

4.2L x 2.4W x 0.9D in. (10.7L x 6.1W x 2.3D cm)

Weight

5 oz (142g) with battery


Request a quote for Electronic Products
Home | Industrial Products | Technology Products | Market Solutions | Resources | Inside Simco-Ion | Contact Us
© Copyright 2013 by Simco-Ion    Privacy Statement | Terms Of Use