You are here: Market Solutions > Plastics > Electrostatic Charge on In Mold Labeling (IML) Login  |  Register
Search

Using an Electrostatic Charge on In Mold Labeling (IML)Using an Electrostatic Charge on In Mold Labeling (IML)

Static charges can be used to pin a decorative decal tight against the inner mold surface during injection molding, a procedure which greatly improves finished product quality. A decal is placed by robot into the mold cavity. An electrostatic charge is applied simultaneously as label vacuum is turned off. The static charge pins the decal to the mold. The decal will not slip or change position in the mold.

Two videos of In-Mold Labeling using the Chargemaster System are available click here for video 1 and click here for video 2

Using an Electrostatic Charge on In Mold Labeling (IML)

Chargemaster CM30 & CM60, Static Charging SystemsChargemaster VCM Static Charging Systems

The Chargemaster VCM supplies the high voltage for charging bars and various charging applicators, which are used to temporarily bond materials. The Chargemaster VCM provides a simple and economical solution for a wide range of production processes.

Pinner and Pinner Bar NR Arc Resistant Static Charging BarsPinner and Pinner Bar NR Arc Resistant Static Charging Bars

Versatile arc resistant bars for any static charging need.

Static Charging ApplicatorsStatic Charging Applicators

Simco-Ion’s Pinner Series static charge applicators consists of the Linear Pinner, 5-Point and Pinner Claw. Pinner applicators are arc-resistant to avoid suspension of static charge and loss of pinning action. The Pinners are current limited to ensure operator and equipment safety.

Home | Industrial Products | Technology Products | Market Solutions | Resources | Inside Simco-Ion | Contact Us
© Copyright 2013 by Simco-Ion    Privacy Statement | Terms Of Use