N167 and N267 Power Supplies

N Series Power Supplies The N167 (120V) and N267 (230V) are Simco-Ion's most versatile power supplies. They can be used with several shockless static bar models (R50 Blue Bar and MEB Bar). A terminal block connector inside the power supply allows for the connection of up to four static eliminators to one power supply. The units accept either shielded or unshielded cable.

The N167 and N267 have the added benefit of being FM approved for use in Class I, Division 1 and 2, Group D hazardous areas for electrostatic finishing applications involving spray painting, dipping, coating, and liquid printing. The power supplies must be installed outside of the hazardous area and be used to power an XP-20F Blower(s) located inside the hazardous location. The connecting high voltage cable must be run through rigid or flexible metal conduit sealed at each end.

The N167 and N267 are designed with short circuit protection (no fuse required!) which protects the power supply in the event of a short in the static eliminator or cable.

UL, cUL, CSA, CE and FM approved.

For additional information on the N Power Supply, contact Simco-Ion Customer Service at 215-822-6401 or email them by CLICKING HERE

Specifications:
N167
Input Requirements	120V, 60 Hz
Output Voltage	7 kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	Yes
Acceptable for hazardous locations	See description
N267
Input Requirements	230V, 60Hz
Output Voltage	7 kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	Yes
Acceptable for hazardous locations	See description
Part Numbers:
N167	4002321
N267	4002322

Typical Use

The N167 (120V) and N267 (230V) can be used with several shockless static bar models (R50 Blue Bar and MEB Bar).

Login

Download Files

You must first Register or Login to gain access to our product downloads. Registration with our site is free and secure.

If you already have an account, please login below. If you need to create an account, you can do that here.

User Name:

Password:

Remember Login

Register

Forgot Password ?

MEJ Static Control Bar The MEJ Static Control Bar has a small, circular size allowing it to easily fit in tight spaces.
MEB Static Control Bar The MEB Static Control Bar is a favorite of machine builders because its small size allows easy installation.
Transvector with MEB Static Control Bar A Transvector with MEB Static Control Bar provides a highly efficient "air knife" or "curtain" of ionized air.
HS Static Control Nozzle HS Static Control Nozzles are "shockless" nozzles. The term shockless indicates that the ionizing point, located inside the nozzle tip, is capacitively coupled to the high voltage source, thus limiting the current at the point to a very low level.