XP-20F Static Elimination Blower

XP-20F The XP-20F Static Control Blower is approved for use in Class I, Division 1 and 2, Group D hazardous areas. This is the only blower available on the market with UL approval for use in hazardous areas. The XP-20F Static Control Blower can be powered by either the XP or the XPM Power Supply. The XP Power Supply is approved for mounting within Class I, Division 1 and 2, Group D hazardous areas. The XPM Power Supply, which must be mounted outside the hazardous area, is approved for use in electrostatic finishing processes involving spray painting, dipping, coating, and liquid printing processes. The high voltage cable connecting the XP-20F Blower to either type of power supply must be run in rigid or flexible metal conduit. All conduit runs are then sealed at the power supply enclosure. (See the XP167 Power Supply dimensional drawing in the Power Supply section for conduit length allowances.)

We recommend that you call Simco-Ion Customer Service at 215-822-6401 if you are not already familiar with installing and operating this equipment. UL approved for Class I, Division 1 and 2, Group D hazardous areas.

Features:

UL Listed for Class I, Division 1 and 2, Group D hazardous areas
Designed for rugged industrial use
Powerful air blast: 285 CFM
Replaceable air intake filter

For additional information on the XP-20F, contact Simco-Ion Customer Service at 215-822-6401 or email them by CLICKING HERE

Specifications:
Power Requirements	120V, 60 Hz, 1.3A
Size (W x H x D)	17 3/4 in. x 9 in. x 16 3/4 in.
Weight	24.7 lbs
Ion Balance	N/A
Area Volume Output	Fixed; 285 cfm
Effective Coverage	2’ x 10’ area
Discharge Time (5000V to 500V at 1	.9 seconds
Integrated Power Supply	No
Built-in Emitter Point Cleaner	No
Approved for Class I, Division 1, Group D Hazardous Locations	Yes
Part Numbers:
XP-20F (order power supply separately)	4000608