Chargemaster CM 20, Charging Generator

The Chargemaster CM20 is a switch-mode, power supply. The unit’s output current is electronically restricted and protected against arcing. The output voltage can be set between 0 and the unit’s maximum voltage (20 kV). The power supply incorporates functions for remote on/off and remote voltage adjustment. relay.

The Chargemaster is CE approved.

For additional information on the Chargemaster CM20, contact Simco-Ion Customer Service at 215-822-6401 or email them by CLICKING HERE

Typical Use

Chill Roll Edge Pinning on Cast Film Line Roll to Roll Changeover Plastic Bagmaking

• Converting: Using an Electrostatic Charge for Roll-to-Roll Changeover
• Converting: Using an Electrostatic Charge on Binders and Video Cassette Covers
• Converting: Electrostatic Charging for Bagmaking
• Packaging: Electrostatic Charging on Dry Bonding Web/Sheet Lamination
• Packaging: Using an Electrostatic Charge for Interleaving a protection layer
• Packaging: Electrostatic Charging for Bagmaking
• Printing/Bindery: Using an Electrostatic Charge for Ribbon Tacking
• Printing/Bindery: Using an Electrostatic Charge for Card Insertion on a Saddle Stitcher
• Printing/Bindery: Electrostatic Charging for Card Insertion on Perfect Bound Line
• Printing/Bindery: Electrostatic Charging for Chill -Tack Systems
• Plastics: Electrostatic Charging on Chill Roll Edge on Cast Film Line
• Plastics: Using an Electrostatic Charge for Interleaving a protection layer
• Plastics: Electrostatic Charging for Bagmaking